-
平臺編號：bio-116149
-
國際編號：ATCC 700717
-
拉丁屬名： Neisseria gonorrhoeae
-
規格：Freeze-dried
-
用途：ATCC原裝進口
-
服務費用：
加載中…… - 訂購
-
注意事項：僅用于科學研究或者工業應用等非醫療目的不可用于人類或動物的臨床診斷或治療，非藥用，非食用（產品信息以出庫為準）
淋病奈瑟氏球菌
拉丁名 Neisseria gonorrhoeae (Zopf) Trevisan
編號 ATCC 700717?
Product category
Bacteria
Product type
Drug-resistant bacterium
Strain designation
BDMS T4145 [CDC 83015965, Difco A0726]
Type strain No
Applications
Antimicrobial resistance research
Drug development
Infectious disease research
Sexually transmitted disease research
Product format 提供形式 Freeze-dried
Storage conditions
2°C to 8°C
BSL 2
ATCC determines the biosafety level of a material based on our risk assessment as guided by the current edition of Biosafety in Microbiological and Biomedical Laboratories (BMBL), U.S. Department of Health and Human Services. It is your responsibility to understand the hazards associated with the material per your organization’s policies and procedures as well as any other applicable regulations as enforced by your local or national agencies.
ATCC highly recommends that appropriate personal protective equipment is always used when handling vials. For cultures that require storage in liquid nitrogen, it is important to note that some vials may leak when submersed in liquid nitrogen and will slowly fill with liquid nitrogen. Upon thawing, the conversion of the liquid nitrogen back to its gas phase may result in the vial exploding or blowing off its cap with dangerous force creating flying debris. Unless necessary, ATCC recommends that these cultures be stored in the vapor phase of liquid nitrogen rather than submersed in liquid nitrogen.
DETAILED PRODUCT INFORMATION
PERMITS & RESTRICTIONS
REFERENCES
Detailed product information
COLLAPSE ALL
General
Specific applications
Sexually Transmitted Disease Research
Preceptrol
No
Characteristics
Susceptibility profile
Resistant
Spectinomycin
Handling information
Medium
ATCC 培養基 Medium 814: GC Agar/Broth Medium
Temperature 培養溫度 37°C
Atmosphere
95% Air, 5% CO2
Handling procedure
Open vial according to enclosed instructions.
Using a single tube of #814 broth (5 to 6 mL), withdraw approximately 0.5 to 1.0 mL with a Pasteur or 1.0 mL pipette. Rehydrate pellet.
Aseptically transfer this aliquot back into the broth tube. Mix well.
Use 0.2 mL of the suspension to inoculate a #814 slant, and/or 0.1 mL for a plate.
Incubate all tubes and plate at 37°C with 5% CO2 for 24 to 48 hours. Assure that screw caps are loose during incubation period.
Handling notes
Brain Heart Infusion (Difco 0037) can be used to rehydrate vial contents if #814 broth is not available, but it will not support growth as well as the GC broth.
Additional information on this culture is available on the ATCC? web site at www.atcc.org.
History
Deposited as
Neisseria gonorrhoeae (Zopf) Trevisan
Depositors
Becton Dickinson Microbiology Systems
Chain of custody 來源國家 ATCC <-- Becton Dickinson Microbiology Systems <-- Difco <-- CDC
Special collection
NCRR Contract
Legal disclaimers
Intended use
This product is intended for laboratory research use only. It is not intended for any animal or human therapeutic use, any human or animal consumption, or any diagnostic use.
Warranty
The product is provided 'AS IS' and the viability of ATCC? products is warranted for 30 days from the date of shipment, provided that the customer has stored and handled the product according to the information included on the product information sheet, website, and Certificate of Analysis. For living cultures, ATCC lists the media formulation and reagents that have been found to be effective for the product. While other unspecified media and reagents may also produce satisfactory results, a change in the ATCC and/or depositor-recommended protocols may affect the recovery, growth, and/or function of the product. If an alternative medium formulation or reagent is used, the ATCC warranty for viability is no longer valid. Except as expressly set forth herein, no other warranties of any kind are provided, express or implied, including, but not limited to, any implied warranties of merchantability, fitness for a particular purpose, manufacture according to cGMP standards, typicality, safety, accuracy, and/or noninfringement.
Disclaimers
This product is intended for laboratory research use only. It is not intended for any animal or human therapeutic use, any human or animal consumption, or any diagnostic use. Any proposed commercial use is prohibited without a license from ATCC.
While ATCC uses reasonable efforts to include accurate and up-to-date information on this product sheet, ATCC makes no warranties or representations as to its accuracy. Citations from scientific literature and patents are provided for informational purposes only. ATCC does not warrant that such information has been confirmed to be accurate or complete and the customer bears the sole responsibility of confirming the accuracy and completeness of any such information.
This product is sent on the condition that the customer is responsible for and assumes all risk and responsibility in connection with the receipt, handling, storage, disposal, and use of the ATCC product including without limitation taking all appropriate safety and handling precautions to minimize health or environmental risk. As a condition of receiving the material, the customer agrees that any activity undertaken with the ATCC product and any progeny or modifications will be conducted in compliance with all applicable laws, regulations, and guidelines. This product is provided 'AS IS' with no representations or warranties whatsoever except as expressly set forth herein and in no event shall ATCC, its parents, subsidiaries, directors, officers, agents, employees, assigns, successors, and affiliates be liable for indirect, special, incidental, or consequential damages of any kind in connection with or arising out of the customer's use of the product. While reasonable effort is made to ensure authenticity and reliability of materials on deposit, ATCC is not liable for damages arising from the misidentification or misrepresentation of such materials.
Please see the material transfer agreement (MTA) for further details regarding the use of this product. The MTA is available at www.atcc.org.
編號 ATCC 700717?
Product category
Bacteria
Product type
Drug-resistant bacterium
Strain designation
BDMS T4145 [CDC 83015965, Difco A0726]
Type strain No
Applications
Antimicrobial resistance research
Drug development
Infectious disease research
Sexually transmitted disease research
Product format 提供形式 Freeze-dried
Storage conditions
2°C to 8°C
BSL 2
ATCC determines the biosafety level of a material based on our risk assessment as guided by the current edition of Biosafety in Microbiological and Biomedical Laboratories (BMBL), U.S. Department of Health and Human Services. It is your responsibility to understand the hazards associated with the material per your organization’s policies and procedures as well as any other applicable regulations as enforced by your local or national agencies.
ATCC highly recommends that appropriate personal protective equipment is always used when handling vials. For cultures that require storage in liquid nitrogen, it is important to note that some vials may leak when submersed in liquid nitrogen and will slowly fill with liquid nitrogen. Upon thawing, the conversion of the liquid nitrogen back to its gas phase may result in the vial exploding or blowing off its cap with dangerous force creating flying debris. Unless necessary, ATCC recommends that these cultures be stored in the vapor phase of liquid nitrogen rather than submersed in liquid nitrogen.
DETAILED PRODUCT INFORMATION
PERMITS & RESTRICTIONS
REFERENCES
Detailed product information
COLLAPSE ALL
General
Specific applications
Sexually Transmitted Disease Research
Preceptrol
No
Characteristics
Susceptibility profile
Resistant
Spectinomycin
Handling information
Medium
ATCC 培養基 Medium 814: GC Agar/Broth Medium
Temperature 培養溫度 37°C
Atmosphere
95% Air, 5% CO2
Handling procedure
Open vial according to enclosed instructions.
Using a single tube of #814 broth (5 to 6 mL), withdraw approximately 0.5 to 1.0 mL with a Pasteur or 1.0 mL pipette. Rehydrate pellet.
Aseptically transfer this aliquot back into the broth tube. Mix well.
Use 0.2 mL of the suspension to inoculate a #814 slant, and/or 0.1 mL for a plate.
Incubate all tubes and plate at 37°C with 5% CO2 for 24 to 48 hours. Assure that screw caps are loose during incubation period.
Handling notes
Brain Heart Infusion (Difco 0037) can be used to rehydrate vial contents if #814 broth is not available, but it will not support growth as well as the GC broth.
Additional information on this culture is available on the ATCC? web site at www.atcc.org.
History
Deposited as
Neisseria gonorrhoeae (Zopf) Trevisan
Depositors
Becton Dickinson Microbiology Systems
Chain of custody 來源國家 ATCC <-- Becton Dickinson Microbiology Systems <-- Difco <-- CDC
Special collection
NCRR Contract
Legal disclaimers
Intended use
This product is intended for laboratory research use only. It is not intended for any animal or human therapeutic use, any human or animal consumption, or any diagnostic use.
Warranty
The product is provided 'AS IS' and the viability of ATCC? products is warranted for 30 days from the date of shipment, provided that the customer has stored and handled the product according to the information included on the product information sheet, website, and Certificate of Analysis. For living cultures, ATCC lists the media formulation and reagents that have been found to be effective for the product. While other unspecified media and reagents may also produce satisfactory results, a change in the ATCC and/or depositor-recommended protocols may affect the recovery, growth, and/or function of the product. If an alternative medium formulation or reagent is used, the ATCC warranty for viability is no longer valid. Except as expressly set forth herein, no other warranties of any kind are provided, express or implied, including, but not limited to, any implied warranties of merchantability, fitness for a particular purpose, manufacture according to cGMP standards, typicality, safety, accuracy, and/or noninfringement.
Disclaimers
This product is intended for laboratory research use only. It is not intended for any animal or human therapeutic use, any human or animal consumption, or any diagnostic use. Any proposed commercial use is prohibited without a license from ATCC.
While ATCC uses reasonable efforts to include accurate and up-to-date information on this product sheet, ATCC makes no warranties or representations as to its accuracy. Citations from scientific literature and patents are provided for informational purposes only. ATCC does not warrant that such information has been confirmed to be accurate or complete and the customer bears the sole responsibility of confirming the accuracy and completeness of any such information.
This product is sent on the condition that the customer is responsible for and assumes all risk and responsibility in connection with the receipt, handling, storage, disposal, and use of the ATCC product including without limitation taking all appropriate safety and handling precautions to minimize health or environmental risk. As a condition of receiving the material, the customer agrees that any activity undertaken with the ATCC product and any progeny or modifications will be conducted in compliance with all applicable laws, regulations, and guidelines. This product is provided 'AS IS' with no representations or warranties whatsoever except as expressly set forth herein and in no event shall ATCC, its parents, subsidiaries, directors, officers, agents, employees, assigns, successors, and affiliates be liable for indirect, special, incidental, or consequential damages of any kind in connection with or arising out of the customer's use of the product. While reasonable effort is made to ensure authenticity and reliability of materials on deposit, ATCC is not liable for damages arising from the misidentification or misrepresentation of such materials.
Please see the material transfer agreement (MTA) for further details regarding the use of this product. The MTA is available at www.atcc.org.
