ATCC medium: 1207 BC Medium for Acetivibrio cellulolyticus
Mineral Solution 1 (see below)......................75.0 ml
Mineral Solution 2 (see below)......................75.0 ml
FeSO4 . 7H2O Solution (see below)....................10.0 ml
Vitamin mixture (see below).........................10.0 ml
Wolfe's Mineral Solution (see below)................10.0 ml
NaHCO3 ...............................................2.0 g
Resazurin solution (0.1% aqueous)....................1.0 ml
Distilled water....................................810.0 ml
Alpha-Cellulose (Sigma C-6429).......................3.0 g
Cysteine-Sulfide Reducing Solution (see below)......12.8 ml
The pH should be 7.6 at room temperature; do not adjust. Bring medium to boil under 10% CO2 90% N2. Cool and continue flushing. Add 8 ml reducing solution. Heat slightly to mix if necessary and add an additional 4.8 ml of reducing solution. Dispense 7.0 ml/tube (anaerobically) and cap.
A note of caution:
This medium contains sodium sulfide and hydrogen sulfide production will occur. Hydrogen sulfide is hazardous and this medium should be prepared in a chemical fume hood. Mineral
Solution 1: K2HPO4 .......................3.9 g
Distilled water..............1.0 L Mineral
Solution 2: KH2PO4 .......................2.4 g
Na2SO4 .......................2.5 g
NH4Cl .......................12.0 g
CaCl2 . 2H2O .................0.8 g
MgSO4 . 7H2O .................1.2 g
Distilled water..............1.0 L
FeSO4 . 7H2O Solution: Dissolve 0.2 g FeSO4 . 7H2O in 100 ml distilled water.Add 3 drops concentrated HCl. 2
Vitamin Mixture:
Biotin...............................................2.0 mg
B6 (pyridoxine hydrochloride).......................10.0 mg
B1 (thiamine . HCl)..................................5.0 mg
B12 (crystalline cyanocobalamin).....................5.0 mg
p-Aminobenzoic acid..................................0.5 mg
Lipoic acid (D,L-6,8-Thioctic acid)..................5.0 mg
Distilled water......................................1.0 L
Store below -20 C.
Wolfe's Mineral Solution: Available from ATCC as a sterile ready-to-use liquid (Trace Mineral Supplement, catalog no. MD-TMS.)
Nitriloacetic acid ..........1.5 g
MgSO4 . 7H2O .................3.0 g
MnSO4 . H2O ..................0.5 g
NaCl.........................1.0 g
FeSO4 . 7H2O .................0.1 g
CoCl2 . 6H2O .................0.1 g
CaCl2 ........................0.1 g
ZnSO4 . 7H2O .................0.1 g
CuSO4 . 5H2O .................0.01 g
AlK(SO4)2 . 12H2O.............0.01 g
H3BO3 ........................0.01 g
Na2MoO4 . 2H2O................0.01 g
Distilled water..............1.0 L
Add nitrilotriacetic acid to approximately 500 ml of water and adjust to pH 6.5 with KOH to dissolve the compound. Bring volume to 1.0 L with remaining water and add remaining compounds one at a time.
Cysteine-Sulfide Reducing Solution (1.25%):
L-Cysteine . HCl..............2.5 g
Na2S . 9H2O ...................2.5 g
Distilled water to............200.0 ml
Dissolve cysteine in 50 ml distilled water. Adjust to pH 10 with fresh 3 N NaOH (rapidly) and start flushing with nitrogen. Add Na2S . 9H2O. Bring total volume to 200 ml (add 150 ml but subtract the volume of 3 N NaOH and boil under nitrogen). Transfer anaerobically to tubes; stopper with butyl rubber and autoclave.